All Passenger Cars & SUV(s) including high-end
Just for our consumers’ peace of mind, we offer 12 months or 12,000 miles / 20,000 km limited warranty on MÜLLER brake pads.
PROFESSIONAL OE STYLE
BRAKE PADS FEATURES
Optimal breaking performance
Increased breaking power in crucial braking situations
Extended brake life and distance performance
Outstanding anti-dust capability for cleaner wheels and tires
High resistance to fade with quick recovery
Reduced wear on pads and rotors
Smooth braking engagement
Decreased brake NVH (Noise, Vibration and Harshness)
100% non-asbestos formulas
Exceptional friction level at all temperatures
Greater consistent pedal feel
Positive Molding Technology is an important factor in production of MÜLLER products. Positive molding results in a more uniform density in the production of the brake pad. It also allows using less resin content in formulation of the brake pad which can lead to improvement in the fading characteristic of the brake pad. The brake pads produced by positive molding process is proven to have much better stopping performance. High resin increases fading, which can increase stopping distances up to 50%.
All MÜLLER brake pads are manufactured using the same positive molding process utilized by Original Equipment suppliers. Positive molding uses extreme pressure to compress the friction material and bond it to the backing plate. This process assures consistent friction material density throughout the pad, resulting in even wear and performance characteristics throughout the life of the brake pad.
Maintains constant friction consistency
Ensures better braking performance
Delivers longer service life
Requires less resin material
Resists heat fade
* MÜLLER Brake Pads are AMECA certified. Formula is tested by an accredited laboratory and registered by NSF for AASA LeafMark. (Most formulas are in compliance with the copper requirements for the States of California and Washington) Most part numbers are certified for E-Mark ECE-R90 by VCA.
In addition to these features MÜLLER has added a scorching process to all of its brake pads. This additional process forces any impurities out of the friction material and pre-burnishes the pads to greatly accelerate the brake-in process. This OEM process enhances key friction performance levels. Scorching raises initial cold effectiveness, stabilizes friction levels right out of the box, provides consistent performance across the entire operating range. During the scorching phase; each brake pad surface is super-heated to simulate the initial break-in process performed by installation technicians. This additional step removes any uncured bonding agents eliminating the need for initial break-in and reducing noise caused by pad glazing. Scorching thermally conditions the pad material which yields a more consistent and higher friction level right out of the box. Scorching benefits the vehicle owner by promoting a more complete bed-in of new pads, increasing the effective stopping power from the first stop.
MATERIAL & OE SCORCHED
In order for a newly installed brake pad to have superior braking performance and comfort from the start, MÜLLER uses a scorching process that delivers a shorter bedding-in period and an efficient brake operation, right from the first brake use.
Available in Wire-drawing and Hole Drilled types.
ANTI-RATTLE 3 LAYER OE
We use the most advanced
Anti-Rattle Shims technology
to ensure a quiet breaking performance for drivers.
OE STYLE CARBON CERAMIC BRAKE PADS
Whether you are crawling through traffic or cruising along the highway, you can count on MÜLLER Carbon Ceramic Brake Pads to deliver superior stopping performance and exceptional braking power over a wide range of driving conditions. With our exceptional brake pads, you don’t have to compromise on quality, safety, reliability, or OE performance.
EXCEPTIONAL BRAKING TECHNOLOGY
Designed to meet Original Equipment (OE) high standards and requirements for quality, fit, and performance, MÜLLER Carbon Ceramic Brake Pads provide superior breaking for all makes and models of vehicles. Our long lasting ceramic brake pads are durable, delivering improved stopping power, reduced rotor wear, and low dust, making them the perfect choice for upgrading from conventional pads.
Engineered to reduce brake noise, our brake pads effectively eliminate noise, vibration, and harshness (NVH). MÜLLER Carbon Ceramic Brake Pads’ innovative ceramic braking technology delivers ultra-quiet, smooth braking performance in a wide variety of driving situations and weather.
E-mark ECE R90 by VCA
MÜLLER has obtained E-Mark ECE R90 certification, which is required for all brake products to be used throughout the European Union and other countries that have adopted to ECE regulations.
MÜLLER has been granted the AMECA certification, which is in compliance with applicable United States standards.
LeafMark is a trademark which is created by AASA and sublicensed by NSF. MÜLLER brake pads have been approved by an NSF accredited laboratory and awarded the LeafMark certification.
Professional Carbon Metallic
Recommended for All Passenger
Cars & SUV(s)
Professional Carbon Ceramic
Recommended for All Passenger Cars
& SUV(s) including high-end
Recommended for Small
Passenger Cars (Sedan)
* Based on best of our knowledge and In comparison with each others.